Ketteschleifer / Chainslider
Verfasst: Mi Okt 15, 2014 8:49 pm
Ich hab vor einiger Zeit mal deine Anleitung für den Kettenschleiferersatz stümperhaft ins Englische übersetzt, weil in der NX250 Gruppe bei Facebook Bedarf war...vielleicht kann es ja jemand gebrauchen...
- the chain slider of the slr 650 (OEM Nr. 52170-MAK-000) is from harder material and about 10 euros cheap.
- you also need some round fittings (together about 6 euros (OEM 52171MAN620))
- you need some work with a "Dremel"-like tool to fit it to the nx 250 link(?) (It's also a brand, so i don't know how it is marketed in english countries)
- take some material away up front, to fit the covercap
- inside the slider, enhance the gap for the welding seams
- on side the channel must be cut, if you use the original chain protection - he cut away both fittings, because the slider@NX250 is floating to center alone with the chain
- he took away some material from the middle base
- last step is drilling two 4 mm holes into the link to give fix it with two 4.8 mm sheet metal screws
- he used a mini angle grinder and had about half an hour work