Hi again,
As I mentioned I bought few days ago a 125 CBR 2011.
I am doing some servicing on it.
I have a problem about torque values, i am not sure of what we are talking about...
In this table I know what is a bolt, a nut, not sure about a screw : because sometimes I can't see differences between bolt and screw I assume this is only a mater of head form. I'm a mechanic engineer and what I call bolt would be a screw + a nut ... at least in france we say that.
Can someone explain me or post photos of :
a SH Flange bolt ?
a 6 mm flange bolt (8mm head, smal flange)
Any idea why in the left table, 6 mm nut need 10 N.m and in the right one they need 12 N.m ?
I know the difference is not that big but yet I'm curious.
Thank you
Need some help with translation from english
-
- Beiträge: 90
- Registriert: Fr Jan 10, 2020 5:25 pm
- Wohnort: France, Brittany
Need some help with translation from english
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- 250oz
- Beiträge: 452
- Registriert: Do Apr 13, 2017 10:38 am
- Wohnort: Baden Württemberg
Re: Need some help with translation from english
Hi Zigomatix,
a flange bolt looks like this:
https://www.amazon.com/1-0-Flange-Bolt- ... B00R1UUSE0
In french: boulon de bride
a normal bolt: boulon
a nut: écrou
I don‘t know why there are differences with the torque values
salut
Chris
a flange bolt looks like this:
https://www.amazon.com/1-0-Flange-Bolt- ... B00R1UUSE0
In french: boulon de bride
a normal bolt: boulon
a nut: écrou
I don‘t know why there are differences with the torque values
salut
Chris
Hauptsache 2 Räder und eine Kette
oder ein Riemen
oder ein Riemen
-
- Beiträge: 90
- Registriert: Fr Jan 10, 2020 5:25 pm
- Wohnort: France, Brittany
Re: Need some help with translation from english
hi Chris, thank you,
I made mistake with the question, I was wondering what is "SH" ?
That would explain why "normal 6 mm bolt and nut" need 10 N.m and "6 mm flange bolt and flange nut" need 12 N.m but "6 mm SH flange bolt" need also 10 N.m
See you
Patrick
I made mistake with the question, I was wondering what is "SH" ?
That would explain why "normal 6 mm bolt and nut" need 10 N.m and "6 mm flange bolt and flange nut" need 12 N.m but "6 mm SH flange bolt" need also 10 N.m
See you
Patrick
- 250oz
- Beiträge: 452
- Registriert: Do Apr 13, 2017 10:38 am
- Wohnort: Baden Württemberg
Re: Need some help with translation from english
Hi Patrick,
me again
sh means serrated head.
a picture:
https://www.albanycountyfasteners.com/3 ... 060000.htm
this has more grip on the underside,
a normal flange head is flat on the underside.
salut
Chris
me again
sh means serrated head.
a picture:
https://www.albanycountyfasteners.com/3 ... 060000.htm
this has more grip on the underside,
a normal flange head is flat on the underside.
salut
Chris
Hauptsache 2 Räder und eine Kette
oder ein Riemen
oder ein Riemen
-
- Beiträge: 90
- Registriert: Fr Jan 10, 2020 5:25 pm
- Wohnort: France, Brittany
Re: Need some help with translation from english
Thanks again Chris
That's clear for me now.
See you
Patrick
That's clear for me now.
See you
Patrick
- scrambler
- Site Admin
- Beiträge: 8321
- Registriert: Fr Sep 14, 2012 8:50 am
Re: Need some help with translation from english
the info in that table is a bit puzzling, I guess there is a mistake.
Its more clear in that table from the German NX250 manual. On the left side are bolts (hexagon head) without flange.
on the right side are screws, which are bolts that are screwed in with a screw driver.
Also given are bolts with flanges, which withstand more torque. For instance: M6 10Nm and M6 with flange 12Nm.
A special case are (e.g. at engine covers NX250) small head M6 bolts also with flange (9Nm)
Its more clear in that table from the German NX250 manual. On the left side are bolts (hexagon head) without flange.
on the right side are screws, which are bolts that are screwed in with a screw driver.
Also given are bolts with flanges, which withstand more torque. For instance: M6 10Nm and M6 with flange 12Nm.
A special case are (e.g. at engine covers NX250) small head M6 bolts also with flange (9Nm)
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
sauve qui peut