LH exhaust tappet adjust cap NX650

Wenns klappert, an der Ampel abstirbt oder kein Zündfunke waltet
Antworten
Befioul
Beiträge: 2
Registriert: Mo Jun 14, 2021 10:39 pm

LH exhaust tappet adjust cap NX650

Beitrag von Befioul »

Hello,

Last day I was checking my valves play, and the RH exhaust cap was very very hard to unscrew. Probably Loctite, so I screwed it back thinking about coming back later with something to heat the head a little.

A few days after, while riding down town, I had that:
2021-06-14-Dominator-RH-exhaust.jpg
Just wanted to know if all of the Dominators have only the RH exhaust cap with Loctite or not?

And is it something from stock?

Thank you for your comments.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Benutzeravatar
scrambler
Site Admin
Beiträge: 8199
Registriert: Fr Sep 14, 2012 8:50 am

Re: LH exhaust tappet adjust cap NX650

Beitrag von scrambler »

Sorry, I totally overlooked that question :roll: .
I guess the previous owner was too cheap to buy new seals for the caps (somewhat expensive h[url]ttps://www.cmsnl.com/honda-nx650-dominator-198 ... 352mg2792/[/url]) and used some kind of sealant instead. With good seals you won’t need any kind of sealant (given that the thread is ok) and it’s important not to over screw the cap’s thread: 15Nm is given by the manual.

Bytheway: on the pic it looks like that the o-ring is not stock: too thin and black - OEM ones are green.
sauve qui peut
Antworten