Bremssattel MD21

Bitte nur private Kleinanzeigen, keine gewerblichen Angebote!
Antworten
Pfalzgraf28
Beiträge: 6
Registriert: Mo Mär 08, 2021 7:41 pm

Bremssattel MD21

Beitrag von Pfalzgraf28 »

Moin und schöne Feiertage,

Hat noch jemand einen Bremssattel für vorne zuhause rumliegen ?

Meiner ist leider total mitgenommen, da das gute Stück sehr vernachlässigt wurde durch den Vorbesitzer.

Grüße Jonas
Benutzeravatar
scrambler
Site Admin
Beiträge: 8199
Registriert: Fr Sep 14, 2012 8:50 am

Re: Bremssattel MD21

Beitrag von scrambler »

Hallo Jonas,

ist das gute Stück denn nicht mehr zu retten (viewtopic.php?f=6&t=23) )? Bilder wären gut ;)

Gruß, Michael
sauve qui peut
Paulito216
Beiträge: 11
Registriert: Di Jun 15, 2021 1:11 am

Re: Bremssattel MD21

Beitrag von Paulito216 »

Hello.
If you astill looking for the front brake caliper i have one rebuilt in perfect conditions.
It has new seal and was repainted with the original color.
Its like new.
I you need it please contact me
Thanks
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
daleipi
Beiträge: 752
Registriert: Sa Dez 08, 2018 5:18 pm

Re: Bremssattel MD21

Beitrag von daleipi »

]any reason for the 'inside' not to be painted?

have done that in the past on some brakes. never had problems.
calip.jpg
these are the last ones I painted. they're for my son's 50cc
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Benutzeravatar
scrambler
Site Admin
Beiträge: 8199
Registriert: Fr Sep 14, 2012 8:50 am

Re: Bremssattel MD21

Beitrag von scrambler »

daleipi hat geschrieben: Mi Sep 22, 2021 3:19 pm ]any reason for the 'inside' not to be painted?
I guess it's simply a question of cutting costs. Brembo calipers are also coated inside https://nx650.nx250.de/albums/userpics/ ... embo_4.jpg
sauve qui peut
HRC

Re: Bremssattel MD21

Beitrag von HRC »

Is there a special paint for that purpose? Normal paint gets dissolved by brake fluid within minutes. And spilling a few drops out of the bleeding valve happens easily when changing the fulid. With coated brake calipers that´s no problem. Just pour some water over the brakes after you are finished and everything is fine. With normal paint...
daleipi
Beiträge: 752
Registriert: Sa Dez 08, 2018 5:18 pm

Re: Bremssattel MD21

Beitrag von daleipi »

I always use MIPA 2K-paints.
never had a problem with brake fluids. wipe and rinse quickly though :D


my primer for nearly everything (steel, fiberglass, aluminum) is this one:

E - https://www.mipa-paints.com/fileadmin/p ... filler.pdf

D - https://www.mipa-paints.com/d/pi/lm/EP100-20.pdf


my colours are mostly this type:

E - https://www.mipa-paints.com/fileadmin/p ... PUR-HS.pdf

D - https://www.mipa-paints.com/d/pi/lm/PUR-HS.pdf
Antworten