NX250 / NX500 / NX650 Dominator Forum

Hi all
Folowing a fork oil leak I have to change my brake pads... and clean my brake disk
I found all these :
Brembo
07HO2506, 07HO25SX, 07HO25TT, 07HO25
TRW
MCB 574 ALL, MCB 574 Si, MCB 574 RSI
GALFER
FD092G1054TT
SBS
603SI, 603HF
EBC
FA153, FA125TT

Can some of you give advice, I want the best braking power, no matter if the pads don't last long.
Thx

P.S. If you know any orther ref, please add them

It would be best if the brake disc and brake pads were from the same manufacturer. I mostly use EBC, sometimes Brembo parts. There are sintered and organic brake pads, I have only used organic ones for the last decades. They are supposed to be easier to dose and don't tend to screech as much as the sinter ones, but they don't last as long.

front brake pads
EBC FA125TT redstuff organic
EBC FA125R goldstuff sinter

rear brake pads
EBC H323 premium
EBC H323G Premium water grooved (not street approved)

https://www.ebc-bremsentechnik.de/ebc-b ... 1990-4189/

Hi, thanks for the advice Mickael.
Did you notice thet there is an oversize front brake disc here :
https://www.ebc-bremsentechnik.de/EBC-S ... MD25-.html

Did someone tryied it ?
It will surely need a new caliper or at least something to adapt the original caliper to the 320 mm disc. Where can I find this adapter ? It is maybe written in the description but, as long as it is in Greman, I can't understand Would someone please have a look ...

Thx

The large brake disc is sold out. Nobody has tested it here yet because it doesn't have TÜV approval. In my opinion it is also unnecessary, the standard brake disc is sufficient for such a light motorcycle.

https://www.youtube.com/watch?v=jXjALEPefYw