Hi Floris,
kuckst du hier
http://www.nx250.de/lenker-hebel.html
Beim Kupplungshebel ist die Sache nicht ganz so einfach, hier gibts nur schweineteure, einstellbare ab ca 90 €. Laut hein gericke
http://www.hein-gericke.de/pro-sports-c ... titan.html
http://www.hein-gericke.de/pro-sports-c ... titan.html
haben folgende Hondas die gleichen Kupplungs/Bremshebel wie die NX250 (ohne Gewähr)
Honda CB 500 (PC26, PC32) `94-`96
Honda CB 600 HORNET (PC34, PC36) `98-`06
Honda CB 750FII (RC42) `92-`01
Honda CB 900 HORNET (SC48) `02-`07
Honda CBF 500/500A (PC39) `04-`06
Honda CBF600N+S (PC38) `04-`06
Honda CBR 900RR (SC28, SC33) `92-`99
Honda CBR600F (PC19) `87-88
Honda CBR600F (PC23, PC25, PC31) `89-98
Honda CBR600F (PC35) `99-`06
Honda GB500 (PC16) `89-`90
Honda NS400R (NC19) `86-
Honda NT 700V/VA (RC52) `06-`10
Honda NTV 650 (RC33) `88-`97
Honda NX250 (MD21) `88-`90
Honda VF 750C (RC43) `93-`00
Honda VFR400R (NC30) `90-`91
Honda VT 750C (RC44) `97-`01
Honda VT 750C/C2 (RC50) `04-`10
Honda VT 750C2 (RC53) `07-`10
Honda VT 750DC (RC48) `01-`02
Honda VT1100C2 (SC32) `96-`99
Honda VT1100C2 (SC39) `98-`99
Honda VT1100C2 (SC43) `00-`02
Honda VT1300CX (SC61) `10
Honda VT600C (PC21) `88-`98
Honda VTX1300S (SC52) `03-`07
Mit der Info könnte man dann in der Bucht nach Sets suchen - gibt allerdings nur sehr teure, von denen aus Hongkon mal abgesehen. Diese haben aber keine ABE (wird beim Bremshebel benötigt).
Für Honda Crosser gibts kurze Kupplungshebel für ein paar Euro, leider passen die nicht auf die NX - man könnte aber deren Kupplungshebel absägen und die Kugel wieder anschweißen. Eigentlich wäre das mal eine Idee für eine Kleinstserie: mal 10 Stück von den 6€ Kupplungshebel kaufen und entsprechend abändern
- vielleicht kann ja jemand hier Al-schweißen.
Gruß, Michael