Hallo aus die Niederlande
-
- Beiträge: 28
- Registriert: Fr Jan 12, 2018 8:48 pm
- Wohnort: Amsterdam
Hallo aus die Niederlande
Hallo, Ich stelle mich gerne vor. Sander aus die Niederlande. Ein NX250 von 1991 aus die USA
-
- Beiträge: 28
- Registriert: Fr Jan 12, 2018 8:48 pm
- Wohnort: Amsterdam
Re: Hallo aus die Niederlande
Ein foto, wie uploaden Ich das ?
- scrambler
- Site Admin
- Beiträge: 8342
- Registriert: Fr Sep 14, 2012 8:50 am
Re: Hallo aus die Niederlande
Hello Sanders,
welcome here in the forum. Feel free to write in english if you feel more comfortable . You can upload your pictures directly from your PC - go to "attachments" and then to "add files". A window will then open and you can select a picture from your PC. It shouldn't be bigger than 4 MB.
After uploading check the status. if the check is green - than put the cursor to the desired position in your text and hit the "place inline" button
Cheers, Michael
welcome here in the forum. Feel free to write in english if you feel more comfortable . You can upload your pictures directly from your PC - go to "attachments" and then to "add files". A window will then open and you can select a picture from your PC. It shouldn't be bigger than 4 MB.
After uploading check the status. if the check is green - than put the cursor to the desired position in your text and hit the "place inline" button
Cheers, Michael
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
sauve qui peut
-
- Beiträge: 28
- Registriert: Fr Jan 12, 2018 8:48 pm
- Wohnort: Amsterdam
Re: Hallo aus die Niederlande
Hi thanks for the instructions. Now I get this warning:
It was not possible to determine the dimensions of the image. Please verify that the URL you entered is correct.
It was not possible to determine the dimensions of the image. Please verify that the URL you entered is correct.
-
- Beiträge: 28
- Registriert: Fr Jan 12, 2018 8:48 pm
- Wohnort: Amsterdam
Re: Hallo aus die Niederlande
The upload status is yellow..
-
- Beiträge: 28
- Registriert: Fr Jan 12, 2018 8:48 pm
- Wohnort: Amsterdam
Re: Hallo aus die Niederlande
For an enduro tour over the Spanish Pyrenees I have changed a few little things.
A 17 Inch wheel on the back with tck8o tyre and a bigger front wheel with pirelly tyre. Also shocks rear from WP and a 1985 XR250 fork on the front.
Also changed the tail light because the original was too fragile. Last thing is XR80 wider steps.
Still on my wish list is a disk brake on the rear, tips are welcome.
A 17 Inch wheel on the back with tck8o tyre and a bigger front wheel with pirelly tyre. Also shocks rear from WP and a 1985 XR250 fork on the front.
Also changed the tail light because the original was too fragile. Last thing is XR80 wider steps.
Still on my wish list is a disk brake on the rear, tips are welcome.
Zuletzt geändert von sandernx am So Aug 23, 2020 6:45 pm, insgesamt 1-mal geändert.
-
- Beiträge: 28
- Registriert: Fr Jan 12, 2018 8:48 pm
- Wohnort: Amsterdam
Re: Hallo aus die Niederlande
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- kalle
- Beiträge: 495
- Registriert: Mo Dez 22, 2014 6:37 pm
- Wohnort: Landkreis OS
Re: Hallo aus die Niederlande
Hallo Sander,
Willkommen hier bei uns im Forum.
Das Heck deiner NX, ist nicht original. Welches Heck ist bei deiner NX verbaut.
Es sieht interessant aus.
Gruß kalle
Willkommen hier bei uns im Forum.
Das Heck deiner NX, ist nicht original. Welches Heck ist bei deiner NX verbaut.
Es sieht interessant aus.
Gruß kalle
-
- Beiträge: 28
- Registriert: Fr Jan 12, 2018 8:48 pm
- Wohnort: Amsterdam
Re: Hallo aus die Niederlande
The rear fender is a xr600 after market from Acerbis.
I custom made it till it fit, not difficult at all.
I custom made it till it fit, not difficult at all.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- scrambler
- Site Admin
- Beiträge: 8342
- Registriert: Fr Sep 14, 2012 8:50 am