When I changed the handlebars, I sprayed the "contact spray" (https://www.amazon.de/Nigrin-72226-Kont ... B008BSW2TU) very well inside the switch. JUST A MIRACLE!!!! Thanks so, so, so much!scrambler hat geschrieben:estebangc hat geschrieben: I am absolutely an electrical dummy, and I am pretty sure that pressing the start button does not produce any noise, although I will soon check it out as well. In that case, if you still remember it, where did you buy the new switch?
You could first try “contact spray” (I don’t know if this is actually the right term - I mean something like that http://www.ebay.de/itm/16-80-1l-Caramba ... Sw~uhUnpo9) spraying into the switch.
If it’s only rust or dirt and old grease that may help. If the contacts are worn out probably not – I had this at ca 80.000km when the contact spray did not work anymore.
I got a used switch then – but they are hard to get and expensive. That’s the only one I can find right now http://www.bike-teile.de/index.php?seit ... id=1495228#
New ones are still available, not that cheap, too http://www.cmsnl.com/products/sw-assy-l ... 150kw3000/ but they will last a long time
NX250 CDI issues
-
- Beiträge: 79
- Registriert: Di Nov 25, 2014 4:29 pm
- Wohnort: Sevilla (E) / Schweiz
Re: NX250 CDI issues
- Petrus
- Beiträge: 22
- Registriert: Mo Dez 05, 2016 12:21 pm
- Wohnort: Portugal
Re: NX250 CDI issues
The ultimate information about "How to" repair a CDI:
http://www.thumpertalk.com/topic/881740 ... di-repair/
And Merry Christmas!
http://www.thumpertalk.com/topic/881740 ... di-repair/
And Merry Christmas!
- scrambler
- Site Admin
- Beiträge: 8243
- Registriert: Fr Sep 14, 2012 8:50 am
New shindengen NX250 CDIs
A new source for original Shindengen popped up https://www.ebay.de/itm/364027550883?ha ... R_KL8vqaYg. They are sold with the label Sun, but under the label you will find Shindengen.
Finally – no more experiments with China or other aftermarket cdis .
Finally – no more experiments with China or other aftermarket cdis .
sauve qui peut
- Yongüein
- Beiträge: 35
- Registriert: Mo Okt 05, 2015 6:58 pm
- Wohnort: Los Barrios Andalucía España
- Kontaktdaten:
Re: NX250 CDI issues
CDI in Germany:
https://www.ebay.de/itm/Honda-AX-1-NX25 ... Sw2FxZ2zrS
CDI in Russia
https://www.ebay.es/itm/CDI-for-Honda-n ... 2749.l2649
https://www.ebay.de/itm/Honda-AX-1-NX25 ... Sw2FxZ2zrS
CDI in Russia
https://www.ebay.es/itm/CDI-for-Honda-n ... 2749.l2649
- scrambler
- Site Admin
- Beiträge: 8243
- Registriert: Fr Sep 14, 2012 8:50 am
Re: NX250 CDI issues
I'm afraid to say that the "German" cdi is just the ordinary Chinese (probably from the NX650) sold for big bucksYongüein hat geschrieben: ↑Do Jul 12, 2018 6:08 pm CDI in Germany:
https://www.ebay.de/itm/Honda-AX-1-NX25 ... Sw2FxZ2zrS
CDI in Russia
https://www.ebay.es/itm/CDI-for-Honda-n ... 2749.l2649
I didn’t try the Russian CDI because my theory (and so far I haven’t been proven wrong) is that there is no aftermarket CDI especially designed for the NX250. It would be too expensive to produce. All aftermarket CDIs I have seen so far are either Chinese or taken from other bikes, and also from China. You can get them for 5$. That’s why apparently a lot of people think they can make some fast money if they sell those CDIs for 40 or much more $.
Now a friend of mine bought a Russian CDI and gave me this info. First of all, the size is different – so it’s very likely a CDI from another Honda. That is confirmed because the CDI did not work and the supplier suggested that the wiring has to be changed (see his drawing below). That happens if the CDI was intended for a bike with side stand switch.
Conclusion: still the only CDI I would recommend is the shindengen viewtopic.php?p=9317#p9317
sauve qui peut
-
- Beiträge: 79
- Registriert: Di Nov 25, 2014 4:29 pm
- Wohnort: Sevilla (E) / Schweiz
Re: New shindengen NX250 CDIs
I want buy one spare before there are no more available! I just asked if he would be willing to ship it to Spain (Switzerland is more of a mess regarding customs).scrambler hat geschrieben: ↑Do Jul 05, 2018 10:40 am A new source for original Shindengen popped up https://www.ebay.de/itm/CDI-Steuergerat ... SwGIRXatG~. They are sold with the label Sun, but under the label you will find Shindengen.
Thanks for the input, Michael!
Esteban
- scrambler
- Site Admin
- Beiträge: 8243
- Registriert: Fr Sep 14, 2012 8:50 am
-
- Beiträge: 90
- Registriert: Fr Jan 10, 2020 5:25 pm
- Wohnort: France, Brittany
Re: NX250 CDI issues
Hi, I don't know if someone will understand but I found this link :
https://www.motor-forum.nl/threads/cdi- ... elf.19436/
Not in english and not in german but might help some of you guys.
https://www.motor-forum.nl/threads/cdi- ... elf.19436/
Not in english and not in german but might help some of you guys.
- scrambler
- Site Admin
- Beiträge: 8243
- Registriert: Fr Sep 14, 2012 8:50 am
Re: NX250 CDI issues
Hi,Zigomatix hat geschrieben: ↑Di Jan 28, 2020 3:09 pm Hi, I don't know if someone will understand but I found this link :
https://www.motor-forum.nl/threads/cdi- ... elf.19436/
Not in english and not in german but might help some of you guys.
this is a how to repair a NX250 CDI by re-soldering the joints. It works sometimes and sometimes not and nobody can garantee how long the CDI will work after a repair. So I never tried this. Here original new CDIs cost only 77€ https://www.ebay.de/itm/402037425931#shpCntId
sauve qui peut
-
- Beiträge: 127
- Registriert: Fr Sep 13, 2019 12:11 am
Re: NX250 CDI issues
Hi Scrambler...have you bought and tested one of these 'Sun' units? I contacted Shingden a while back and they said they were no longer producing them, so these ebay units are either new old stock or shingden has made a new batch...