Moin und schöne Feiertage,
Hat noch jemand einen Bremssattel für vorne zuhause rumliegen ?
Meiner ist leider total mitgenommen, da das gute Stück sehr vernachlässigt wurde durch den Vorbesitzer.
Grüße Jonas
Bremssattel MD21
- scrambler
- Site Admin
- Beiträge: 8291
- Registriert: Fr Sep 14, 2012 8:50 am
Re: Bremssattel MD21
Hallo Jonas,
ist das gute Stück denn nicht mehr zu retten (viewtopic.php?f=6&t=23) )? Bilder wären gut
Gruß, Michael
ist das gute Stück denn nicht mehr zu retten (viewtopic.php?f=6&t=23) )? Bilder wären gut
Gruß, Michael
sauve qui peut
-
- Beiträge: 11
- Registriert: Di Jun 15, 2021 1:11 am
Re: Bremssattel MD21
Hello.
If you astill looking for the front brake caliper i have one rebuilt in perfect conditions.
It has new seal and was repainted with the original color.
Its like new.
I you need it please contact me
Thanks
If you astill looking for the front brake caliper i have one rebuilt in perfect conditions.
It has new seal and was repainted with the original color.
Its like new.
I you need it please contact me
Thanks
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
-
- Beiträge: 754
- Registriert: Sa Dez 08, 2018 5:18 pm
Re: Bremssattel MD21
]any reason for the 'inside' not to be painted?
have done that in the past on some brakes. never had problems.
these are the last ones I painted. they're for my son's 50cc
have done that in the past on some brakes. never had problems.
these are the last ones I painted. they're for my son's 50cc
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- scrambler
- Site Admin
- Beiträge: 8291
- Registriert: Fr Sep 14, 2012 8:50 am
Re: Bremssattel MD21
I guess it's simply a question of cutting costs. Brembo calipers are also coated inside https://nx650.nx250.de/albums/userpics/ ... embo_4.jpg
sauve qui peut
Re: Bremssattel MD21
Is there a special paint for that purpose? Normal paint gets dissolved by brake fluid within minutes. And spilling a few drops out of the bleeding valve happens easily when changing the fulid. With coated brake calipers that´s no problem. Just pour some water over the brakes after you are finished and everything is fine. With normal paint...
-
- Beiträge: 754
- Registriert: Sa Dez 08, 2018 5:18 pm
Re: Bremssattel MD21
I always use MIPA 2K-paints.
never had a problem with brake fluids. wipe and rinse quickly though
my primer for nearly everything (steel, fiberglass, aluminum) is this one:
E - https://www.mipa-paints.com/fileadmin/p ... filler.pdf
D - https://www.mipa-paints.com/d/pi/lm/EP100-20.pdf
my colours are mostly this type:
E - https://www.mipa-paints.com/fileadmin/p ... PUR-HS.pdf
D - https://www.mipa-paints.com/d/pi/lm/PUR-HS.pdf
never had a problem with brake fluids. wipe and rinse quickly though
my primer for nearly everything (steel, fiberglass, aluminum) is this one:
E - https://www.mipa-paints.com/fileadmin/p ... filler.pdf
D - https://www.mipa-paints.com/d/pi/lm/EP100-20.pdf
my colours are mostly this type:
E - https://www.mipa-paints.com/fileadmin/p ... PUR-HS.pdf
D - https://www.mipa-paints.com/d/pi/lm/PUR-HS.pdf