Hello everybody.
It has been a long time since my last post but I think i must tell here the end (by now
) of my NX transformation.
Scrambler sold me a nice plug and play hub, spokes and 21" rim set. Thanks a lot Michael.
First thing I did was sand it and paint it,
Second thing was to break one of the hub studs as I overtighted the security nuts I had bought
This is the brake disc I got from eBay.
It has 6 mm holes so having discarted the original studs I went to Honda dealer and ordered four bolts.
My NX has a 10 mm nut / holes brake disc so I could not reuse the ones I already had.
So now I have two complete front wheel sets. One in 19" and the new one in 21"
New 6 mm bolt and original 10 mm-
What I did not know is that between hole and nut there is some play. I must say it dissapointed me at first but eventuallu I found out it wassomething normal (thanks again, Michael)
Then I went for the front tire. It had to be a bit narrower than the original as the rim is also narrower (1.60" vs 1.85")
I choose Pirelli MT21 80/90-21" to match the rear MT21 mounted on the rear
And this is the final result