Handguards

Open for English requests from all countries!
Antworten
Yongüein
Beiträge: 21
Registriert: Mo Okt 05, 2015 6:58 pm
Wohnort: Los Barrios Andalucía España
Kontaktdaten:

Handguards

Beitrag von Yongüein » Mi Okt 07, 2015 3:23 pm

Not so long ago I bought a pair of sturdy, good looking and with a very decent quality closed handguards from a chinese eBay seller.

It was so bad that I had to resell them as they did not fit my bike because they contacted the front fairing. Maybe it was because my steering bar is not the stock one but a wider enduro one

Are there any available brands you know they sure fit? An eBay link would work for me

Benutzeravatar
scrambler
Site Admin
Beiträge: 2174
Registriert: Fr Sep 14, 2012 8:50 am

Re: Handguards

Beitrag von scrambler » Do Okt 08, 2015 8:47 am

Yongüein hat geschrieben:Not so long ago I bought a pair of sturdy, good looking and with a very decent quality closed handguards from a chinese eBay seller.

It was so bad that I had to resell them as they did not fit my bike because they contacted the front fairing. Maybe it was because my steering bar is not the stock one but a wider enduro one

Are there any available brands you know they sure fit? An eBay link would work for me
Hi,

the NX250 got the same clutch lever & brackets and brake lever as the NTV – so I guess their hand guards fit http://www.ebay.de/itm/Acerbis-X-Tarmac ... 5d512276af. But I haven’t tried this because I always use handguards from the NX650 or Transalp XL600-XL700. High quality and almost unbreakable.
handschützer.JPG
On the right side you only need a longer screw http://zsf-motorrad.de/product/126025|0

Bild

On the left you either have to design a new longer bolt or you take the complete clutch lever & bracket from the NX650 or Transalp. Nice side effect: the NX parts are shorter and the brake lever is adjustable.
kupplung nx250.JPG
Bild

Cheers, Michael
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.

Yongüein
Beiträge: 21
Registriert: Mo Okt 05, 2015 6:58 pm
Wohnort: Los Barrios Andalucía España
Kontaktdaten:

Re: Handguards

Beitrag von Yongüein » Do Okt 15, 2015 2:16 pm

Too expensive for me those NTV handguards,


I will try to find NX650/Transalp option. Is it necesary to chang e lever ?The handguards are open and they should fit.Any modifications needed in the right side?

Benutzeravatar
scrambler
Site Admin
Beiträge: 2174
Registriert: Fr Sep 14, 2012 8:50 am

Re: Handguards

Beitrag von scrambler » Fr Okt 16, 2015 6:30 am

Yongüein hat geschrieben:Too expensive for me those NTV handguards,


I will try to find NX650/Transalp option. Is it necesary to chang e lever ?The handguards are open and they should fit.Any modifications needed in the right side?
The NX650/Transalp lever will not fit on the NX250 bracket and vice versa. On the right side you just need the longer screw, otherwise its plug and play. Even though the handguards are open they really do a good job in protecting the levers - I never had a broken lever ever since.

Cheers, Michael

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast